ApparelX is B2B e-commerce site for the apparel industry.

By March 31! We're giving away a special coupon to celebrate 100K orders! Special Page

›
NSW100

NSW100 Water-soluble Resin Interlining For Product Dyeing And Product Washing Soft Type 40/ Nittobo Advantex

NSW100

Water-soluble Resin Interlining For Product Dyeing And Product Washing Soft Type 40/

Name: Water-soluble Resin Interlining For Product Dyeing And Product Washing Soft Type 40/
Brand: Nittobo Advantex
SKU: 1020000
Rating: 5 (2 reviews)

ApparelX ID:1020000

Because it is made of 100% cotton, it can be dyed in the same color as the outer material when dyed with direct dyes.
Since we use a water-soluble adhesive resin, it is glued during the sewing stage, but when washed with water it becomes a non fusible interlining, giving it a comfortable texture that cannot be achieved with fusible interlining.
It uses a dot-type resin structure, so it is less sticky and easier to handle than conventional sintered types.

Maker:Nittobo Advantex

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Color

Please select a color:

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Order Sample Book

You can order the sample book here:

*Note: Sample Book Item to be added to your cart, so if you want to cancel it, please remove it from your cart. The information to be set in the remarks.

SAMPLE

Sample Card

Item Description

Press conditions ・ Flat type

temperature	120 ~ 135 ℃
time	10 to 15 seconds
pressure	2.0 ~ 3.0 × 10-² MPa (0.2 ~ 0.3kgf / cm²)

・ Roller type

temperature	120-135 ℃
time	10-12 seconds
pressure	0.15 ~ 0.3MPa (1.5 ~ 3.0kgf / cm²)

* Press conditions vary depending on the press model, so it is recommended to try and paste each time.

<Caution>
-The adhesive may become viscous in a humid place. Please keep away from hot and humid places.
・ When cutting, roll in one direction.
-When using, please process the core retainer such as stitches and locks.
・ Do not dry clean the product while it is still adhered.
-When dyeing or washing the product, first dissolve the resin in water at 40 ° C or lower, and then perform the drainage and rinsing process.

product number	ONW30	ONW50	BW810	BW820	BW870	BW890	NSW30	NSW100	NSW190W	NSW300	NSW600
Product name	Highly durable interlining for bio products (30D)	Highly durable interlining for bio products (50D)	Product washing process Water-based washable durable interlining (15D)	Product washing processing, water-based washing durable interlining (30D)	Product washing processing, water-based washable durable interlining (30D)	Product washing processing, water-based washable durable interlining (30D)	Water-soluble resin interlining for product dyeing and washing, stretch-processed thread type	Water-soluble resin interlining for product dyeing and washing, soft type 40/	Water-soluble resin interlining for product dyeing and washing, standard type 45/	Water-soluble resin interlining for product dyeing and washing, hard type	Water-soluble resin interlining for product dyeing and washing, semi-hard type 45/
Thumbnail
Order of thickness	2	3	1	2	2	2	2	3	3	5	4
type	Highly durable, fully adhesive type	Highly durable, fully adhesive type	Highly durable, fully adhesive type	Highly durable, fully adhesive type	Highly durable, fully adhesive type	Highly durable, fully adhesive type	Water-soluble type/stretch	Water-soluble type/soft	Water-soluble type/standard	Water-soluble type/Hard	Water-soluble type/semi-hard
Applications	Jackets, blousons, coats	Jackets, blousons, coats	Blouson, jacket, coat, pants front, facing, parts	Blouson, jacket, coat, pants front, facing, parts	Blouson, jacket, coat, pants front, facing, parts	Blouson, jacket, coat, pants front, facing, parts	General product washing, shirts, etc.	General product washing, shirts, etc.	General product washing, shirts, etc.	General product washing, shirts, etc.	General product washing, shirts, etc.
Suitable materials	Natural materials, composites, synthetic materials	Natural materials, composites, synthetic materials	Natural materials, composites, synthetic materials	Natural materials, composites, synthetic materials	Natural materials, composites, synthetic materials	Natural materials, composites, synthetic materials	Natural to composite materials	Natural to composite materials	Natural to composite materials	Natural to composite materials	Natural to composite materials

*You can scroll horizontally.

*The above information is for reference only. Please check the actual product before use.

Category	Interlining
Subcategory	Fusible Interlining
Gender	Unisex
Use Applications	General Purpose
Material	Cotton
Organization	Taffeta
Style	PANT, SHIRT, SKIRT


Specification	88/92 cm width x 60 meters
Material	100% cotton CO
Maker	Nittobo Advantex

Share This Item

FAQ

Regarding this item, there are the following FAQ:

What kind of trouble is glitter?

This is a phenomenon in which the resin can be seen glittering through the gaps in the surface material.
Low-density materials and dark-colored thin fabrics tend to stand out, so using colored resin can solve this problem.

What kind of trouble is Shimidashi?

The adhesive resin oozes out into the outer textile, which spoils the texture.
As a solution, choose a small shape adhesive resin.

What kind of trouble is fading?

The unevenness of the resin grains clearly appears on the surface of the outer textile. The solution is to choose a smaller resin interlining.

What does the D (denier) in 20D and 30D mean?

Denier is a unit used for filament thread(continuous long fiber)* and refers to the weight per 9000m. 1g at 9000m is 1 denier, and 50g is 50 denier.
The higher the denier, the thicker the thread and the thicker the fabric.

What is the difference between white, such as KW, fusible interlining, W, and Y, in the color of the fusible interfacing?

The color notation differs depending on the product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is more pure white.

What kind of trouble is bubbling?

It looks like there are fine air bubbles between the outer textile and the interlining. The textile and the interlining are incompatible, so it is placed. If you choose a vertical or horizontal stretch interlining, it may be eliminated.

What is the difference between single-dot and double-dot fusible interlining interfacing?

The difference is the coating method of the adhesive.
A single dot is made by solidifying a fine powder adhesive and transferring it to the base fabric (base fabric) in dots.
Since the adhesive is fine, it does not fading out even on thin materials, and it is difficult to get hits.
Double Dot has a two-layer structure in which a gel-like adhesive is used as the base, and powdered adhesive is piled up on top of it.
High adhesive strength can be obtained for a wide range of materials.

How do I choose an interlining?

The interlining varies depending on the outer material, thickness, and location of use, so it is not possible to generalize.
Please let us know the material of the outer material, the parts to be used (neckline, body, etc.) and the desired texture from the inquiry form.

Also, if you provide the outer material, we can conduct an adhesion test. Please request from interlining adhesion test .
By performing an adhesion test, you can know in advance the adhesion strength and changes in appearance.

Is it possible to ship the interlining in a bar roll?

Basically, if it is 5m or more, we will ship it by wrapping it around a stick.