ApparelX is B2B e-commerce site for the apparel industry.

ONP10 Light-weight, Horizontal, Shape-retaining Interlining For Jackets And Coats 20D×75D*30D Nittobo Advantex

ONP10

Light-weight, Horizontal, Shape-retaining Interlining For Jackets And Coats 20D×75D*30D

ApparelX ID:1020451

An ultra-lightweight horizontal interlining for jackets and coats. Demonstrates stable adhesion to worsted wool. The warp is 20D, and the weft is 75D and 30D.

Maker:Nittobo Advantex

Supplier:

Color:Please select

Stock Status(*):Displayed after account registration

*Before taxes

Qty.

Inquiry About This Item

Color

Please select a color:

Order Remarks

You can write a memo for the supplier, or yourself:

Enter Order Remarks

Order Sample Book

You can order the sample book here:

*Note: Sample Book Item to be added to your cart, so if you want to cancel it, please remove it from your cart. The information to be set in the remarks.

SAMPLE

Sample Card

Item Description

An ultra-lightweight horizontal interlining for jackets and coats. Demonstrates stable adhesion to worsted wool. The warp is 20D, and the weft is 75D and 30D.

Press conditions/Flat type

temperature	130~150℃
time	10-12 seconds
pressure	0.03MPa (3.0kgf/cm²)

・Roller type

temperature	120-140℃
time	10-12 seconds
pressure	0.2MPa (2.0kgf/cm²)

*Pressing conditions vary depending on the press model, so we recommend that you test and paste each time.

Category	Interlining
Subcategory	Fusible Interlining
Gender	Unisex
Use Applications	General Purpose
Material	Polyester
Color Pattern	No Pattern
Style	JACKET, OUTER


Country of Origin	Japan
Specification	122cm x 50m
Maker	Nittobo Advantex

Share This Item

FAQ

Regarding this item, there are the following FAQ:

What is horizontal interlining?

Horizontal interlining is stretchable in the vertical direction but not stretchable in the horizontal direction and retains its shape.
It is especially suitable for jackets because it follows the movement while maintaining the silhouette.

What does 75D*30D mean?

Indicates alternate weaving of 75 and 30 denier thread.
Since 30 denier thread is used, the thickness is less than when all 75 denier thread is used, but there is more tension and stiffness than when all 30 denier yarn is used.

What kind of trouble is glitter?

This is a phenomenon in which the resin can be seen glittering through the gaps in the surface material.
Low-density materials and dark-colored thin fabrics tend to stand out, so using colored resin can solve this problem.

What kind of trouble is Shimidashi?

The adhesive resin oozes out into the outer textile, which spoils the texture.
As a solution, choose a small shape adhesive resin.

What kind of trouble is fading?

The unevenness of the resin grains clearly appears on the surface of the outer textile. The solution is to choose a smaller resin interlining.

What does the D (denier) in 20D and 30D mean?

Denier is a unit used for filament thread(continuous long fiber)* and refers to the weight per 9000m. 1g at 9000m is 1 denier, and 50g is 50 denier.
The higher the denier, the thicker the thread and the thicker the fabric.

What is the difference between white, such as KW, fusible interlining, W, and Y, in the color of the fusible interfacing?

The color notation differs depending on the product number, but KW and W are fluorescent white, and Y and OW are off-white.
Fluorescent white is more pure white.

What kind of trouble is bubbling?

It looks like there are fine air bubbles between the outer textile and the interlining. The textile and the interlining are incompatible, so it is placed. If you choose a vertical or horizontal stretch interlining, it may be eliminated.

What is the difference between single-dot and double-dot fusible interlining interfacing?

The difference is the coating method of the adhesive.
A single dot is made by solidifying a fine powder adhesive and transferring it to the base fabric (base fabric) in dots.
Since the adhesive is fine, it does not fading out even on thin materials, and it is difficult to get hits.
Double Dot has a two-layer structure in which a gel-like adhesive is used as the base, and powdered adhesive is piled up on top of it.
High adhesive strength can be obtained for a wide range of materials.

How do I choose an interlining?

The interlining varies depending on the outer material, thickness, and location of use, so it is not possible to generalize.
Please let us know the material of the outer material, the parts to be used (neckline, body, etc.) and the desired texture from the inquiry form.

Also, if you provide the outer material, we can conduct an adhesion test. Please request from interlining adhesion test .
By performing an adhesion test, you can know in advance the adhesion strength and changes in appearance.

ONP10 Light-weight, Horizontal, Shape-retaining Interlining For Jackets And Coats 20D×75D*30D

Unit

Size

Color

Extension Key

Stock List

Order Remarks

Option

Order Sample Book

Item Description

FAQ

General Notes

Reviews

Related Items

Items checked by persons who checked this item

Items from the same category

Items from the same maker

ONP10

Light-weight, Horizontal, Shape-retaining Interlining For Jackets And Coats 20D×75D*30D